So installieren Sie den Windows-Treiber für das ORGA 930 M online Gesundheitsterminal

How to Download and Install the ORGA 930 M Driver

If you are looking for a mobile card terminal that can read health insurance cards, electronic health cards, and health professional cards, you might want to consider the ORGA 930 M online from Worldline. This device is designed to work with the online telematics infrastructure (TI) and provide fast and secure data transmission. In this article, we will show you how to download and install the ORGA 930 M driver on your PC, as well as how to use it with your practice software.

What is ORGA 930 M?

The ORGA 930 M online is a mobile card terminal that can read various types of smart cards used in the healthcare sector. It has a color display, a keypad, a USB port, a battery compartment, and a slot for inserting a security module card (SMC-B). The device can communicate with the online TI via WLAN or mobile network, and can also connect to your PC via USB cable. The device is certified by the gematik, the German organization responsible for developing and implementing the TI.

orga 930 m treiber download

Download File: https://moryoapyu.blogspot.com/?download=2vutOr

Features and benefits of ORGA 930 M

Some of the features and benefits of using ORGA 930 M are:

• It can read health insurance cards (KVK), electronic health cards (eGK), and health professional cards (HBA) of different generations.

• It can perform online checks of card validity and insurance status, as well as access online services such as emergency data management (NFDM) and electronic medication plan (eMP).

• It can store up to 200 card readings in its internal memory, which can be transferred to your PC later.

• It has a long battery life of up to 10 hours in standby mode or up to 300 card readings per charge.

• It has a user-friendly interface with clear instructions and feedback on the display.

• It has a compact and ergonomic design that fits comfortably in your hand.

Requirements and compatibility of ORGA 930 M

To use ORGA 930 M, you need to have:

orga 930 m online firmware update

orga 930 m online kartenleser software

orga 930 m online installieren windows 10

orga 930 m online update tool download

orga 930 m online cross-zertifikate liste

orga 930 m online telematikinfrastruktur

orga 930 m online bedienungsanleitung pdf

orga 930 m online gesundheitsterminal treiber

orga 930 m online worldline healthcare gmbh

orga 930 m online mac treiber installieren

orga 930 care firmware update download

orga 930 care kartenleser software windows

orga 930 care installieren windows 7

orga 930 care update tool zip

orga 930 care cross-zertifikate liste aktualisieren

orga 930 care telematikinfrastruktur anbindung

orga 930 care bedienungsanleitung pdf download

orga 930 care gesundheitsterminal treiber windows 10

orga 930 care worldline healthcare gmbh support

orga 930 care mac treiber download kostenlos

orga 920 m plus firmware update download

orga 920 m plus kartenleser software windows

orga 920 m plus installieren windows xp

orga 920 m plus update tool zip download

orga 920 m plus cross-zertifikate liste erneuern

orga 920 m plus telematikinfrastruktur upgrade

orga 920 m plus bedienungsanleitung pdf kostenlos

orga 920 m plus gesundheitsterminal treiber windows vista

orga 920 m plus worldline healthcare gmbh kontakt

orga 920 m plus mac treiber download gratis

worldline healthcare gmbh software und treiber download center

worldline healthcare gmbh software und treiber updates für mobile kts

worldline healthcare gmbh software und treiber für stationäre terminal

worldline healthcare gmbh software und treiber für mac computer apple

worldline healthcare gmbh software und treiber firmware update tool für mobile kartenleser orga

worldline healthcare gmbh software und treiber windows setup v2.7.0.0 zip

worldline healthcare gmbh software und treiber windows setup v2.0.0.0 zip

worldline healthcare gmbh software und treiber mac-treiber_orga_terminals_09.2011.dmg exe file

worldline healthcare gmbh software und treiber windows firmware-update tool für mobile orga kartenleser zip

worldline healthcare gmbh software und treiber d - 24220 flintbek kontakt

• A SMC-B card with a valid PIN. This card is required to authenticate yourself as a healthcare provider and access the online TI. You can order a SMC-B card from Worldline or from other authorized providers.

• A PC with Windows operating system (Windows XP or higher) and a USB port. You also need to have a practice software that supports ORGA 930 M. You can check with your software provider if they offer this compatibility.

• A WLAN or mobile network connection. You need to have access to a wireless network or a SIM card with data plan to connect your device to the online TI. You can configure your network settings on your device or on your PC.

How to download the ORGA 930 M driver

To use ORGA 930 M with your PC, you need to download and install the driver that matches your device's firmware version. The driver is a software that allows your PC to recognize and communicate with your device. You can download the driver from the Worldline website by following these steps:

Step 1: Visit the Worldline website

Go to and click on the "Downloads" tab. You will see a list of available downloads for different devices and software. Scroll down to find the section for ORGA 930 M online.

Step 2: Choose the appropriate firmware update tool

Depending on your device's firmware version, you need to choose the corresponding firmware update tool to download. You can check your device's firmware version by pressing the "Menu" button on your device and selecting "System Info". The firmware version is displayed as "FW Version". The latest firmware version as of June 2023 is 1.4.0. If your device has a lower firmware version, you need to update it before installing the driver.

To download the firmware update tool, click on the link that matches your device's firmware version. For example, if your device has firmware version 1.3.0, click on the link that says "Firmware Update Tool V1.4.0 for ORGA 930 M online with FW V1.3.0". A zip file will be downloaded to your PC.

Step 3: Verify the SHA-256 hash value of the downloaded file

To ensure that the file you downloaded is authentic and not corrupted, you need to verify its SHA-256 hash value. The SHA-256 hash value is a unique code that identifies the file and can be used to compare it with the original source. You can find the SHA-256 hash value of each file on the Worldline website, next to the download link.

To verify the SHA-256 hash value of the downloaded file, you need to use a tool that can calculate and compare hash values. One such tool is HashCalc, which you can download from . After installing HashCalc, open it and select "SHA-256" as the hash algorithm. Then, drag and drop the downloaded zip file into the "Data" field. The tool will calculate and display the SHA-256 hash value of the file in the "Result" field. Compare this value with the one on the Worldline website and make sure they match exactly. If they do not match, do not proceed with the installation and contact Worldline for support.

How to install the ORGA 930 M driver

After downloading and verifying the firmware update tool, you can proceed with installing the ORGA 930 M driver on your PC by following these steps:

Step 1: Open the battery compartment and insert the batteries

Before connecting your device to your PC, you need to insert four AA batteries into the battery compartment of your device. To do this, slide down the cover of the battery compartment at the back of your device and insert the batteries according to the polarity markings. Then, slide up the cover until it clicks into place.

Step 2: Follow the instructions on the display to set up the device

After inserting the batteries, turn on your device by pressing and holding the "On/Off" button. The device will display a welcome message and ask you to set the date and time. Use the keypad to enter the correct values and press "OK" to confirm. The device will then ask you to select the language and the country. Use the arrow keys to scroll through the options and press "OK" to confirm. The device will then display the main menu.

Step 3: Insert the SMC-B card and enter the PINs

To access the online TI, you need to insert your SMC-B card into the device and enter your PINs. To do this, slide the SMC-B card into the slot at the top of your device until it clicks into place. The device will recognize the card and display its serial number. Then, press "OK" to proceed. The device will ask you to enter your PINs for authentication. There are two types of PINs: the transport PIN and the personal PIN. The transport PIN is a temporary PIN that is assigned to your card when you receive it. You need to change it to a personal PIN that only you know. The personal PIN is a permanent PIN that you use to access the online TI. You can change it anytime you want.

To change your transport PIN to a personal PIN, enter your transport PIN using the keypad and press "OK". The device will ask you to enter a new personal PIN of your choice. Enter a four-digit number that is easy for you to remember but hard for others to guess. Press "OK" to confirm. The device will ask you to repeat your new personal PIN for verification. Enter it again and press "OK". The device will display a message that says "PIN changed successfully". Press "OK" to continue.

To enter your personal PIN, enter it using the keypad and press "OK". The device will display a message that says "PIN correct". Press "OK" to continue.

Step 4: Connect the device to your PC via USB cable

To install the driver on your PC, you need to connect your device to your PC via USB cable. To do this, plug one end of the USB cable into the USB port of your device and the other end into a free USB port of your PC. The device will display a message that says "USB connected". Press "OK" to continue.

Step 5: Run the firmware update tool and follow the instructions

To install the driver on your PC, you need to run the firmware update tool that you downloaded earlier. To do this, locate the zip file that contains the firmware update tool on your PC and extract its contents to a folder of your choice. Then, open the folder and double-click on the file that says "FirmwareUpdateTool.exe". A window will pop up that shows the firmware update tool interface.

The firmware update tool will automatically detect your device and display its serial number, firmware version, and battery status. It will also show you the available firmware updates for your device. To install the driver, click on the button that says "Install Driver". A window will pop up that asks you to confirm your action. Click on "Yes" to proceed.

The firmware update tool will then install the driver on your PC and display a message that says "Driver installation successful". Click on "OK" to close the window. The firmware update tool will also show you a green check mark next to the button that says "Install Driver". This means that the driver installation is complete.

How to use ORGA 930 M with your practice software

After installing the driver on your PC, you can use ORGA 930 M with your practice software to read and process the data from the smart cards. However, the compatibility and functionality of ORGA 930 M may vary depending on your practice software provider. Here are some examples of how to use ORGA 930 M with different practice software providers:

CGM MEDISTAR

If you use CGM MEDISTAR as your practice software, you can use ORGA 930 M to read the eGK and the HBA cards and transfer the data to your patient records. You can also access the online services of the TI, such as NFDM and eMP, and print or save the documents. To use ORGA 930 M with CGM MEDISTAR, you need to have the latest version of CGM MEDISTAR (version 21.1 or higher) and the CGM CONNECT module (version 2.0 or higher). You also need to configure the settings of CGM MEDISTAR and ORGA 930 M according to the instructions provided by CGM. For more information, please visit .

Other software providers

If you use a different practice software provider, you need to check with them if they support ORGA 930 M and how to use it with their software. Some of the software providers that have announced their compatibility with ORGA 930 M are:

Software provider

Website

medatixx

Turbomed

Indamed

MediFox

MediVision

Conclusion

In this article, we have shown you how to download and install the ORGA 930 M driver on your PC, as well as how to use it with your practice software. ORGA 930 M is a mobile card terminal that can read various types of smart cards used in the healthcare sector and connect to the online TI. It has many features and benefits that can enhance your workflow and efficiency. We hope that this article has been helpful and informative for you. If you have any questions or feedback, please feel free to contact us.

FAQs

Here are some frequently asked questions about ORGA 930 M:

Q: How can I update the firmware of my ORGA 930 M device?

A: You can update the firmware of your ORGA 930 M device by using the firmware update tool that you downloaded from the Worldline website. To do this, connect your device to your PC via USB cable and run the firmware update tool. The tool will show you the available firmware updates for your device and allow you to install them. Please note that you need to have a valid SMC-B card inserted in your device before updating the firmware.

Q: How can I change the network settings of my ORGA 930 M device?

A: You can change the network settings of your ORGA 930 M device by using the network configuration tool that you downloaded from the Worldline website. To do this, connect your device to your PC via USB cable and run the network configuration tool. The tool will allow you to configure your WLAN or mobile network settings, such as SSID, password, APN, etc. You can also scan for available networks and test your connection.

Q: How can I troubleshoot my ORGA 930 M device?

A: If you encounter any problems or errors with your ORGA 930 M device, you can try some of these troubleshooting tips:

• Check if your device has enough battery power and charge it if necessary.

• Check if your device is connected to a WLAN or mobile network and has a stable signal.

• Check if your SMC-B card is inserted correctly and has a valid PIN.Check if your device has the latest firmware version and update it if necessary.

• Check if your device has the correct driver installed on your PC and reinstall it if necessary.

• Check if your practice software supports ORGA 930 M and has the latest version and updates.

• Restart your device and your PC and try again.

If none of these tips solve your problem, you can contact Worldline for technical support. You can find their contact details on their website or on the user manual of your device.

Q: How can I clean and maintain my ORGA 930 M device?

A: To keep your ORGA 930 M device in good condition, you should follow some basic cleaning and maintenance tips:

• Clean your device regularly with a soft, dry cloth. Do not use any liquids, solvents, or abrasive materials that could damage the device.

• Protect your device from dust, moisture, heat, and direct sunlight. Do not expose your device to water or other liquids.

• Store your device in a safe and dry place when not in use. Do not drop or shake your device or apply excessive force or pressure on it.

• Replace the batteries when they are low or empty. Do not use rechargeable batteries or mix different types or brands of batteries. Do not leave the batteries in the device for a long time when not in use.

• Remove the SMC-B card from the device when not in use. Do not bend, scratch, or damage the card or its contacts.

Q: How can I get more information about ORGA 930 M?

A: If you want to learn more about ORGA 930 M, you can visit the Worldline website or download the user manual of your device. You can also watch some video tutorials on how to use ORGA 930 M on YouTube. Here are some links that you might find useful:

• 
  

• 
  

• 
  

44f88ac181